VTO HP
Automatic suction nozzle filter

MAXIMUM PRESSURE
10 bar

FILTRATION LEVEL
10–2,000 microns

MAXIMUM FLOW RATE
30–600m³/h

FILTER TYPE
Automatic

The VTO HP is a self-cleaning mesh filter with a stainless steel housing, suitable for use with water containing moderate levels of small solid particles, including colloidal particles.
The internal “sandwich” filter cartridge consists of two AISI 316L/DUPLEX SAF2205/TITANIUM stainless steel tubular screens with an intermediate polyester/nylon filter fabric.
The filtration ranges from 10 to 2000 μm, and the cartridge is cleaned internally using the “suction scanning” principle, in which special nozzles—mounted on a rotating and translating PVC shaft driven by a 230 V AC electric motor coupled to a gearbox—suck up the impurities and carry them to the discharge port.
The standard filter is supplied and wired with an automation unit (differential pressure switch and electronic control unit), a drain assembly with a PACV hydraulic valve, and three pressure gauges.
During the cleaning cycle, the VTO HP filter does not interrupt the permeate flow; it requires an inlet pressure of at least 1.5 bar, ensuring reduced cleaning times and water consumption. [PATENT PENDING]
General Features
CLEANING

VTO
FEATURES

Non-stop flow

Differential pressure kit

Drinking water (optional)
APPLICATIONS

Industry

Municipalities

HVAC/R

Desalination

Seawater treatment

Wastewater treatment

