technologies


The REPS three-layer cartridge kit consists of an AISI 316L stainless steel filter mesh welded between two AISI 316L stainless steel micro-perforated sheet metal supports. This system provides the cartridge with high resistance to abrasion and chemical agents. This filtration cartridge kit is recommended as an alternative to the Sandwich cartridge kit in more demanding operating conditions where polyester/nylon fabric is not suitable.
The REPS three-layer cartridge kit is available in various filtration grades and also includes two seals made of EPDM, NBR, Viton, or silicone.
It is used in the following filters: ROTOR, ROTOR HP, VTO, VTO HP, VACUUM, and VACUUM HP.


The REPS double-layer cartridge kit is made entirely of AISI 316L stainless steel using double-layer technology. This type of cartridge is highly durable and is recommended as an alternative to polyester/nylon in more demanding operating conditions where the use of fabric is not suitable.
The REPS dual-layer cartridge kit is available in various filtration grades and also includes two seals made of EPDM, NBR, Viton, or silicone.
It is used in the following filters: AUTOJET, ACQUASPEED, TURBONET, BRUSH, SIMPLEX, and FILTRO V.


The polyester cartridge kit consists of an AISI 316L stainless steel mesh housing into which a polyester (PES)/nylon (PA) filter fabric is inserted; this system offers a wide range of filtration grades to choose from.
The cartridge kit also includes two seals made of EPDM, NBR, Viton, or silicone.
It is used in the following filters: AUTOJET, ACQUASPEED, TURBONET, BRUSH, SIMPLEX, and FILTRO V.


The Sandwich Cartridge Kit consists of a polyester (PES)/nylon (PA) filter fabric sandwiched between two AISI 316L micro-perforated stainless steel plates and a polypropylene (PP) protective mesh, This system protects the polyester (PES)/nylon (PA) fabric from abrasion caused by the suction shoes coming into contact with the filter cartridge, while also offering a wide range of filtration grades.
The Sandwich cartridge kit is available in various filtration grades and also includes two seals made of EPDM, NBR, Viton, or silicone.
It is used in the following filters: ROTOR, ROTOR HP, VTO, VTO HP, VACUUM, and VACUUM HP.


The FITO cartridge consists of multiple triangular profiles made of AISI 316L stainless steel (also available in Duplex upon request), and the way they are arranged determines the filtration rating.
The FITO cartridge kit is available in various filtration grades and also includes two seals made of EPDM, NBR, Viton, or silicone.
It is used in the following filters: ROTOR, ROTOR HP, VTO, VTO HP, VACUUM, VACUUM HP, and FILTRO V.


The micro-perforated cartridge kit consists of an AISI 316L stainless steel filter mesh featuring round holes arranged at 60° intervals. This design provides the cartridge with high resistance to abrasion and chemicals; it is suitable for filtration applications involving the separation of coarse particles.
This filtration cartridge kit is recommended as an alternative to the FITO cartridge kit when absolute filtration is required.
The micro-perforated cartridge kit is available in various filtration grades and also includes two seals made of EPDM, NBR, Viton, or silicone.
It is used in the following filters: TURBONET, BASKET, SIMPLEX, ROTOR, ROTOR HP, VTO, and VTO HP.


The HF cartridge kit consists of a filter media and a support mesh joined together by a square-weave bonding layer. Sintering the layers together results in a filtration system suitable for industrial applications.
Low flow resistance and effective backwashing capabilities allow for handling higher pressure loads.
It is used in the following filters: ALL SATI FILTERS

SPRAYnozzles technology is particularly well-suited for processes in which suspended solids are difficult to remove; the pressurized water jets ensure a thorough cleaning of the filter element.

The Brush technology cleans the filter element using a rotating shaft equipped with brushes, which remove non-colloidal suspended solids.

VTO technology uses the principle of suction scanning to remove suspended solids. The combination of rotational and translational motion of the cleaning shaft allows for the use of fewer suction nozzles and ensures very low water consumption during cleaning at low pressures.

SATI’s innovative FlexSuction system maximizes the performance of the suction scanning system thanks to the special flexible design of the suction pad, which ensures a perfect seal against the filter surface. This technology delivers maximum suction efficiency, ensuring thorough cleaning of the filter mesh while minimizing water consumption.

